Provides a high strength building entry fitting for connecting a polyethylene gas service pipe to an internal metering or pressure reduction installation via a steel through wall pipe for below ground connection.
Construction:
• Body and sleeve: steel
• Outlet pipe cover: PE
• Inlet pipe: PE to GIS/PL2-2
• Sleeve seal: EPDM rubber
• Corrosion protection: PE and zinc plate
Specification:
• Meets GIS/PL3:2014 requirements
• BSI Kite Mark accredited – KM535530
• Maximum Operating Pressure (MOP) = 2.0 Bar
Other sizes available upon request.
| Wolseley Code | Supplier Code | Product description | Essential product range | Quantity |
|---|---|---|---|---|
| P93947 | AE2043 | 25MM SDR11 x ¾" MALE, 0.5 BODY x 0.5 PE80 | - | |
| J10201 | AE2044 | 32MM SDR11 x 1" MALE, 0.5 BODY x 0.5 PE80 | Yes | |
| J10202 | AE2045 | 63MM SDR11 x 2" MALE, 0.5 BODY x 0.5 PE80 | Yes | |
| CA3515 | AE2046 | 20MM SDR11 x ¾" MALE, 0.5 BODY x 0.5 PE80 | - | |
| CA6338 | AE2049 | 90MM SDR11 x 3" PLAIN, 0.75 BODY x 1.25 PE80 | - |
Call us on 0344 2511 999
Visit our branch finder page
My list 
