Our Power range

A comprehensive range of LV resin and heat shrink joints plus HV cold shrink and heat shrink joints to meet all DNO and IDNO specifications. All available in kit format (with or without resin if appropriate) to take the hassle out of component selection.

All of our cable is fully complete with all of the UK Distribution Network Operators and Independent Distribution Network Operators from low voltage to 33KV.

All available cables will be supplied in full drums or bespoke lengths, which can help reduce cost and waste on site.

A full range of Combined Heavy Duty Cut Outs ranging from 200amp to 600amp which meet all DNO and IDNO specifications.

The full range of ENATS12-24 compliant ducting from class three 32mm through the standard sizes of twinwall class two, right up to 225mm class one.

• Twinwall mains ducting
• Red ducting
• Smooth bore PE ducting
• Service duct

All the earthing equipment needed for DNO compliant earthing installations. Kits available for substation earthing

Copper and galvanised

• Earth rods
• Driving pins
• Couplers
• Clamps
• Copper tape
• Green/yellow and bare copper cables 6mm – 120mm
• Hard drawn copper

(All other substation and building earthing available on request)

We offer a full range of fuses from 6 amp to 800amp to meet all your DNO/iDNO needs

• Street Lighting Fuses to BS88 from 6 amp to 25 amp
• House Fuses to BS1361 from 60 amp to 100 amp
• J Type Fuses from 100 amp to 800 amp with both 82mm and 92mm centres
• Time Lag Fuses from 5 amp to 15 amp

We offer a comprehensive range of both heat shrink and cold shrink materials to suit all cable types.

A full range of Heavy Duty Cut Outs ranging from 200amp to 600amp which meet all DNO and IDNO specifications.

We supply a range of kits to meet all of our customers’ specific needs.

Kits include:

• House Service Cutouts 1ph and 3ph
• Pre Assembled Meter Boards 1ph and 3ph
• Street Lighting
• Heat Shrink and Cold Shrink End Caps
• LV Terminations
• Link Boxes
• Substation Earthing
• Fibre

We carry a full range of DNO and IDNO low voltage joints to suits all sizes of Service and Waveform cables.

• Service Straight, Branch, Service Branch and Stop End
• Mains Straight, Branch, Service Branch and Stop End
• Heatshrink
• Resin filled

For all LV terminations, such as heavy-duty cut outs and domestic service terminations, including MSDBs, CTCO, CT chambers and streetlight cutouts, most assembled into kits so taking the worry out of component selections.

LV Terminations:

• Meter board assemblies for single and 3-phase
• House service cutouts, 3-phase 100a cut outs
• MSDB (Multi Service Distribution Boards) all types
• Heavy-duty cut outs (200a – 600a)
• Combined CT cut outs
• Street light cut outs
• Aluminium and brass shear off lugs to suit all cables with either a 12mm or 16mm hole
• Range of heat shrink products

We offer a comprehensive range of both generic or DNO/IDNO specification of marker tapes and boards. All tapes are manufactured to ENATS12-23.

• Standard 100 micron tapes
• Tape tile in 150mm, 200mm and 250mm wide options
• Cable covers ranging from 150mm to 300mm wide in both 9mm and 12mm thickness

We supply a full range of recessed and surface mounted meter boxes to all IDNO/DNO specifications.

The boxes are available in 1 phase or 3-phase

Associated products we also stock include hockey sticks, cable guards and meter boards both in standard and fireproof materials.

A comprehensive range of MSDB boards ranging from 7 way to 60 way in both 3 core and 4 core options. All the units meet all the current DNO and IDNO specifications.

• Left-hand or right-hand incoming option on 15 way to 45 way units
• 1J or 2J option on 15 way to 36 way units

• 2 part and 3 part DNO specification resin packs
• Polyurethane jointing resin
• Isocyanate free JEM compound
• Green plastic compound
• Red putty
• Densomastic

All our substations meet both DNO and IDNO specifications. We now offer an express delivery service on a select range of products.

• 315KVA, 500KVA, 800KVA, 1000KVA and 1500KVA transformers
• Full range of ring main units and remote tripping units
• LV cabinets 800a to 2500a including both ACBs and MCCBs
• Substations assembled in house
• Full ENW testing available
• Hiab off loading available
• Combined deliveries of substations, GRPs and materials to cut down issues on site

We have a full range of tapes and consumable items to complete your job.